How to add a flow

If you wish to add a flow that is not part of this Accelerator, the steps below describe how to add a flow(s) to your Project.  Please note that the steps below are based on a specific example; actual resource names and locations will vary based on your specific requirements.

Adding an inbound flow:

The steps below use the example of adding an inbound 860 flow. 

1. Create a package in the com.cleo._customer_.edi project. Name it com.cleo._customer_.edi.n860).
2. Create an 860 EDI schema (make sure to use the correct version).
3. Create a package in the project com.cleo._customer_.booster.d365bc. Name it com.cleo._customer_.booster.d365bc.salesOrderChangeRequest.
4. Create a Business Process to call the required D365BC Business Process.
5. Check out the com.cleo.cic.cockpit.core.n860 Project from the Cleo repository and add it to the dependencies referenced in the com.cleo._customer_.d365bc._tp_ project.
6. Create a package in the com.cleo._customer_.edid365bc project. Name it com.cleo._customer_.edid365bc.inbound.n860.
7. Create an inbound route BPS and configure it as required.
8. Create a package in the com.cleo._customer_.d365bc._tp_ projectcom.cleo._customer_.d365bc._tp_.inbound.n860.v4010.
9. Create an Inbound EDI Route and configure it accordingly.
10. Create the transformation Ruleset per specific mapping requirements.
11. Deploy all projects that have changed.
12. Run and test the flow.

Adding an outbound flow:

The steps below use the example of adding an inbound 846 flow. 

1. Create a package in the com.cleo._customer_.edi project. Name it com.cleo._customer_.edi.n846.
2. Create an 846 EDI Schema (make sure to use the correct version).
3. Create a package in the project com.cleo._customer_.edi.booster.d365bc. Name it com.cleo._customer_.edi.booster.d365bc.inventory.
4. Create your Process Schedulers, Launcher Business Process, and DARS (Ruleset).
5. Check out the com.cleo.cic.cockpit.core.n846 project from the Cleo repository and add it to the dependencies as referenced in the com.cleo._customer_.d365bc._tp_project.
6. Create a package in the com.cleo._customer_.edid365bc project. Name it com.cleo._customer_.edid365bc.outbound.n846.
7. Create an Outbound Route Business Process and configure it per your requirements. As a guide, you can refer to the Outbound810RouteBPS found in the com.cleo._customer_.edi.d365bc.customer.outbound.n810 package.
8. Create a package in the com.cleo._customer_.d365bc._tp_project. Name it com.cleo._customer_.d365bc._tp_.outbound.n846.v4010.
9. Create an Outbound EDI Route and configure it accordingly.
10. Create the transformation Ruleset per your mapping requirements.
11. Create and configure the EDI Enveloper.
12. Deploy all projects that have changed.
13. Run and test the flow.

Always contact Cleo Support if you need assistance.